The Encyclopedia of How · topic

How does adhesive tape stick to a surface?

Short answers to 8 questions from The Encyclopedia of How. Each answer is the opening of the full entry in the book.

How does adhesive tape stick to a surface?

Pressure-sensitive tape is coated with a soft, tacky polymer adhesive. Pressing it against a surface increases intimate contact by allowing the adhesive to deform around microscopic bumps and valleys instead of touching only the highest points.

How does a one-way mirror work?

A so-called one-way mirror is a partially reflective, partially transmitting surface rather than a mirror that works in only one direction. A thin coating reflects some incoming light while allowing some to pass through. The effect depends on a large difference in illumination.

How does a revolving door reduce heat loss from a building?

A revolving door acts as an air lock. Its enclosed compartments rotate between the inside and outside, so outside air cannot flow directly into the building.

How does an object accelerate as it falls?

An object in free fall near Earth's surface accelerates downward at about 9.8 meters per second squared when air resistance can be ignored. This means its downward velocity changes by roughly 9.8 meters per second each second over short distances near the surface.

How does momentum keep a moving object moving?

Momentum is a measure of motion equal to an object's mass multiplied by its velocity. Momentum itself is not a force that keeps an object moving. Rather, Newton's first law says that an object continues at constant velocity unless a net external force changes its motion.

How does an airbag protect a passenger during a crash?

Airbag control units monitor acceleration and other crash information and deploy selected airbags when a collision meets programmed conditions. A pyrotechnic inflator or other gasgenerating system fills the bag extremely quickly—typically within only a few tens of milliseconds after deployment begins.

How does a lever make a heavy object easier to lift?

A lever is a rigid bar that pivots on a point called the fulcrum. When you push down on one end, the other end lifts the load. The mechanical advantage depends on the distances from the fulcrum.

How does a gyroscope resist changes in its orientation?

A spinning gyroscope has angular momentum, a vector quantity that tends to remain constant unless an external torque acts on it. This gives a rapidly spinning rotor directional stability, but it does not mean the rotor simply refuses every attempt to tilt it.

These are short versions. The full entries, and the rest of the book, are in The Encyclopedia of How.