The Encyclopedia of Why · topic

Why does soda eventually go flat?

Short answers to 8 questions from The Encyclopedia of Why. Each answer is the opening of the full entry in the book.

Why does soda eventually go flat?

Soda goes flat because the carbon dioxide gas escapes from the liquid. When the bottle or can is open, the gas slowly diffuses out of the liquid and into the air. The rate of escape depends on the temperature, the surface area, and the pressure.

Why do bubbles suddenly appear on scratches or tiny imperfections inside a glass?

Bubbles form at nucleation sites — tiny imperfections in the glass. When you pour a carbonated drink into a glass, the gas comes out of solution and forms bubbles. But the gas needs a place to start.

Why does polishing metal make it more reflective?

Polishing smooths the surface of the metal at the microscopic level. A rough surface scatters light in many directions, so it looks dull. A smooth surface reflects light in a more organized way, so it looks shiny. Polishing removes tiny scratches and imperfections.

Why can light pass through glass but not through a wall?

Ordinary glass is transparent to much of visible light because its electronic structure does not strongly absorb those wavelengths, and a good piece of glass is uniform enough that relatively little visible light is scattered.

Why are most solid objects opaque?

Most solid objects are opaque because visible light is absorbed, scattered, or both before it can travel through enough material to emerge clearly on the other side. Whether a solid absorbs visible light depends on its electronic structure.

Why can a sudden temperature change shatter glass?

Glass expands when heated and contracts when cooled. If one part of the glass is heated or cooled faster than another, the different parts expand or contract at different rates. This creates stress inside the glass.

Why can a tiny flaw make glass much easier to break?

A tiny flaw — a scratch, a chip, or a crack — creates a weak point in the glass. When stress is applied, it concentrates at the tip of the flaw.

Why can even strong glue eventually fail?

Even the strongest glue can fail over time. A bond can weaken through moisture, heat, UV exposure, chemicals, repeated loading, or simple aging. These can alter the adhesive itself, weaken its grip on the surface, or damage the material being bonded.

These are short versions. The full entries, and the rest of the book, are in The Encyclopedia of Why.