The Encyclopedia of Why · topic

How does glue make two surfaces stick together?

Short answers to 8 questions from The Encyclopedia of Why. Each answer is the opening of the full entry in the book.

Why can a rubber band become warm when you stretch it quickly?

When you stretch a rubber band quickly, you're doing work on it. The warming is not mainly caused by internal friction. Rubber has an unusual thermoelastic response tied to the changing arrangement of its long polymer chains.

How does glue make two surfaces stick together?

Glue works by creating an adhesive bond between two surfaces. The glue fills the tiny gaps and pores in the surfaces, and when it hardens, it locks them together. The process has several steps.

How can a suction cup hold something up without glue?

A suction cup works by creating a region of lower air pressure beneath the cup — not usually a perfect vacuum. When you press the cup against a smooth surface, the air is pushed out from under the cup.

Why does a suction cup eventually fall off?

A suction cup eventually falls off because the vacuum is not perfect. Air slowly leaks in around the edges of the cup, equalizing the pressure. Once the pressure inside and outside the cup are the same, there's no force holding the cup in place.

How can a small key move the heavy mechanism inside a lock?

A key works by lifting the pins inside a lock to the correct height. The lock contains a cylinder with a series of pins. Each pin is in two parts: a driver pin and a key pin. A spring pushes the driver pins down.

Why is a doorknob placed far from the hinges?

The doorknob is placed far from the hinges to give you leverage. The hinge is the pivot point. The farther you are from the pivot, the less force you need to move the door. This is the principle of the lever.

Why is it easier to push a door near the handle than near the hinges?

This is the same principle of leverage. The hinges are the pivot point. When you push near the hinges, you're applying force close to the pivot, so you need more force to move the door.

Why does a longer wrench make a stubborn bolt easier to turn?

A longer wrench gives you more leverage. The wrench acts as a lever, and the bolt is the pivot point. The force you apply at the end of the wrench is multiplied by the length of the wrench.

These are short versions. The full entries, and the rest of the book, are in The Encyclopedia of Why.